diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
new file mode 100644
index 0000000..db1606e
--- /dev/null
+++ b/drivers/scsi/Kconfig
@@ -0,0 +1,17 @@
+config SCSI
+	bool "Support SCSI controllers"
+	help
+	  This enables support for SCSI (Small Computer System Interface),
+	  a parallel interface widely used with storage peripherals such as
+	  hard drives and optical drives. The SCSI standards define physical
+	  interfaces as well as protocols for controlling devices and
+	  tranferring data.
+
+config DM_SCSI
+	bool "Support SCSI controllers with driver model"
+	depends on BLK
+	help
+	  This option enables the SCSI (Small Computer System Interface) uclass
+	  which supports SCSI and SATA HDDs. For every device configuration
+	  (IDs/LUNs) a block device is created with RAW read/write and
+	  filesystem support.
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
new file mode 100644
index 0000000..9e23699
--- /dev/null
+++ b/drivers/scsi/Makefile
@@ -0,0 +1,20 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
+obj-$(CONFIG_SCSI) += scsi.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_SATA_SUPPORT
+obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
+obj-$(CONFIG_SCSI) += scsi.o
+endif
+endif
+
+obj-$(CONFIG_SANDBOX) += sandbox_scsi.o
diff --git a/drivers/scsi/sandbox_scsi.c b/drivers/scsi/sandbox_scsi.c
new file mode 100644
index 0000000..f4004a3
--- /dev/null
+++ b/drivers/scsi/sandbox_scsi.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * This file contains dummy implementations of SCSI functions requried so
+ * that CONFIG_SCSI can be enabled for sandbox.
+ */
+
+#include <common.h>
+#include <scsi.h>
+
+void scsi_bus_reset(void)
+{
+}
+
+void scsi_init(void)
+{
+}
+
+int scsi_exec(ccb *pccb)
+{
+	return 0;
+}
diff --git a/drivers/scsi/scsi-uclass.c b/drivers/scsi/scsi-uclass.c
new file mode 100644
index 0000000..05da6cd
--- /dev/null
+++ b/drivers/scsi/scsi-uclass.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ * Copyright (c) 2016 Xilinx, Inc
+ * Written by Michal Simek
+ *
+ * Based on ahci-uclass.c
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <scsi.h>
+
+static int scsi_post_probe(struct udevice *dev)
+{
+	debug("%s: device %p\n", __func__, dev);
+	scsi_low_level_init(0, dev);
+	return 0;
+}
+
+UCLASS_DRIVER(scsi) = {
+	.id		= UCLASS_SCSI,
+	.name		= "scsi",
+	.post_probe	 = scsi_post_probe,
+};
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
new file mode 100644
index 0000000..6175e50
--- /dev/null
+++ b/drivers/scsi/scsi.c
@@ -0,0 +1,688 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <inttypes.h>
+#include <pci.h>
+#include <scsi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+#if !defined(CONFIG_DM_SCSI)
+#ifdef CONFIG_SCSI_DEV_LIST
+#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
+#else
+#ifdef CONFIG_SATA_ULI5288
+
+#define SCSI_VEND_ID 0x10b9
+#define SCSI_DEV_ID  0x5288
+
+#elif !defined(CONFIG_SCSI_AHCI_PLAT)
+#error no scsi device defined
+#endif
+#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#endif
+#endif
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
+const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
+#endif
+static ccb tempccb;	/* temporary scsi command buffer */
+
+static unsigned char tempbuff[512]; /* temporary data buffer */
+
+#if !defined(CONFIG_DM_SCSI)
+static int scsi_max_devs; /* number of highest available scsi device */
+
+static int scsi_curr_dev; /* current device */
+
+static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
+#endif
+
+/* almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_READ_BLK 0xFFFF
+#define SCSI_LBA48_READ	0xFFFFFFF
+
+static void scsi_print_error(ccb *pccb)
+{
+	/* Dummy function that could print an error for debugging */
+}
+
+#ifdef CONFIG_SYS_64BIT_LBA
+void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks)
+{
+	pccb->cmd[0] = SCSI_READ16;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff;
+	pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff;
+	pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff;
+	pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff;
+	pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff;
+	pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff;
+	pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff;
+	pccb->cmd[9] = (unsigned char)start & 0xff;
+	pccb->cmd[10] = 0;
+	pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff;
+	pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff;
+	pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff;
+	pccb->cmd[14] = (unsigned char)blocks & 0xff;
+	pccb->cmd[15] = 0;
+	pccb->cmdlen = 16;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+	debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n",
+	      pccb->cmd[0], pccb->cmd[1],
+	      pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+	      pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9],
+	      pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]);
+}
+#endif
+
+static void scsi_setup_read_ext(ccb *pccb, lbaint_t start,
+				unsigned short blocks)
+{
+	pccb->cmd[0] = SCSI_READ10;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
+	pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
+	pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
+	pccb->cmd[5] = (unsigned char)start & 0xff;
+	pccb->cmd[6] = 0;
+	pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff;
+	pccb->cmd[8] = (unsigned char)blocks & 0xff;
+	pccb->cmd[6] = 0;
+	pccb->cmdlen = 10;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+	debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+	      pccb->cmd[0], pccb->cmd[1],
+	      pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+	      pccb->cmd[7], pccb->cmd[8]);
+}
+
+static void scsi_setup_write_ext(ccb *pccb, lbaint_t start,
+				 unsigned short blocks)
+{
+	pccb->cmd[0] = SCSI_WRITE10;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
+	pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
+	pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
+	pccb->cmd[5] = (unsigned char)start & 0xff;
+	pccb->cmd[6] = 0;
+	pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff;
+	pccb->cmd[8] = (unsigned char)blocks & 0xff;
+	pccb->cmd[9] = 0;
+	pccb->cmdlen = 10;
+	pccb->msgout[0] = SCSI_IDENTIFY;  /* NOT USED */
+	debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+	      __func__,
+	      pccb->cmd[0], pccb->cmd[1],
+	      pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+	      pccb->cmd[7], pccb->cmd[8]);
+}
+
+static void scsi_setup_inquiry(ccb *pccb)
+{
+	pccb->cmd[0] = SCSI_INQUIRY;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmd[2] = 0;
+	pccb->cmd[3] = 0;
+	if (pccb->datalen > 255)
+		pccb->cmd[4] = 255;
+	else
+		pccb->cmd[4] = (unsigned char)pccb->datalen;
+	pccb->cmd[5] = 0;
+	pccb->cmdlen = 6;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+}
+
+#ifdef CONFIG_BLK
+static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
+		       void *buffer)
+#else
+static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr,
+		       lbaint_t blkcnt, void *buffer)
+#endif
+{
+#ifdef CONFIG_BLK
+	struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
+#endif
+	lbaint_t start, blks;
+	uintptr_t buf_addr;
+	unsigned short smallblks = 0;
+	ccb *pccb = (ccb *)&tempccb;
+
+	/* Setup device */
+	pccb->target = block_dev->target;
+	pccb->lun = block_dev->lun;
+	buf_addr = (unsigned long)buffer;
+	start = blknr;
+	blks = blkcnt;
+	debug("\nscsi_read: dev %d startblk " LBAF
+	      ", blccnt " LBAF " buffer %lx\n",
+	      block_dev->devnum, start, blks, (unsigned long)buffer);
+	do {
+		pccb->pdata = (unsigned char *)buf_addr;
+#ifdef CONFIG_SYS_64BIT_LBA
+		if (start > SCSI_LBA48_READ) {
+			unsigned long blocks;
+			blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK);
+			pccb->datalen = block_dev->blksz * blocks;
+			scsi_setup_read16(pccb, start, blocks);
+			start += blocks;
+			blks -= blocks;
+		} else
+#endif
+		if (blks > SCSI_MAX_READ_BLK) {
+			pccb->datalen = block_dev->blksz *
+				SCSI_MAX_READ_BLK;
+			smallblks = SCSI_MAX_READ_BLK;
+			scsi_setup_read_ext(pccb, start, smallblks);
+			start += SCSI_MAX_READ_BLK;
+			blks -= SCSI_MAX_READ_BLK;
+		} else {
+			pccb->datalen = block_dev->blksz * blks;
+			smallblks = (unsigned short)blks;
+			scsi_setup_read_ext(pccb, start, smallblks);
+			start += blks;
+			blks = 0;
+		}
+		debug("scsi_read_ext: startblk " LBAF
+		      ", blccnt %x buffer %" PRIXPTR "\n",
+		      start, smallblks, buf_addr);
+		if (scsi_exec(pccb) != true) {
+			scsi_print_error(pccb);
+			blkcnt -= blks;
+			break;
+		}
+		buf_addr += pccb->datalen;
+	} while (blks != 0);
+	debug("scsi_read_ext: end startblk " LBAF
+	      ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr);
+	return blkcnt;
+}
+
+/*******************************************************************************
+ * scsi_write
+ */
+
+/* Almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_WRITE_BLK 0xFFFF
+
+#ifdef CONFIG_BLK
+static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
+			const void *buffer)
+#else
+static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr,
+			lbaint_t blkcnt, const void *buffer)
+#endif
+{
+#ifdef CONFIG_BLK
+	struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
+#endif
+	lbaint_t start, blks;
+	uintptr_t buf_addr;
+	unsigned short smallblks;
+	ccb *pccb = (ccb *)&tempccb;
+
+	/* Setup device */
+	pccb->target = block_dev->target;
+	pccb->lun = block_dev->lun;
+	buf_addr = (unsigned long)buffer;
+	start = blknr;
+	blks = blkcnt;
+	debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
+	      __func__, block_dev->devnum, start, blks, (unsigned long)buffer);
+	do {
+		pccb->pdata = (unsigned char *)buf_addr;
+		if (blks > SCSI_MAX_WRITE_BLK) {
+			pccb->datalen = (block_dev->blksz *
+					 SCSI_MAX_WRITE_BLK);
+			smallblks = SCSI_MAX_WRITE_BLK;
+			scsi_setup_write_ext(pccb, start, smallblks);
+			start += SCSI_MAX_WRITE_BLK;
+			blks -= SCSI_MAX_WRITE_BLK;
+		} else {
+			pccb->datalen = block_dev->blksz * blks;
+			smallblks = (unsigned short)blks;
+			scsi_setup_write_ext(pccb, start, smallblks);
+			start += blks;
+			blks = 0;
+		}
+		debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
+		      __func__, start, smallblks, buf_addr);
+		if (scsi_exec(pccb) != true) {
+			scsi_print_error(pccb);
+			blkcnt -= blks;
+			break;
+		}
+		buf_addr += pccb->datalen;
+	} while (blks != 0);
+	debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
+	      __func__, start, smallblks, buf_addr);
+	return blkcnt;
+}
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
+void scsi_init(void)
+{
+	int busdevfunc = -1;
+	int i;
+	/*
+	 * Find a device from the list, this driver will support a single
+	 * controller.
+	 */
+	for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+		/* get PCI Device ID */
+#ifdef CONFIG_DM_PCI
+		struct udevice *dev;
+		int ret;
+
+		ret = dm_pci_find_device(scsi_device_list[i].vendor,
+					 scsi_device_list[i].device, 0, &dev);
+		if (!ret) {
+			busdevfunc = dm_pci_get_bdf(dev);
+			break;
+		}
+#else
+		busdevfunc = pci_find_device(scsi_device_list[i].vendor,
+					     scsi_device_list[i].device,
+					     0);
+#endif
+		if (busdevfunc != -1)
+			break;
+	}
+
+	if (busdevfunc == -1) {
+		printf("Error: SCSI Controller(s) ");
+		for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+			printf("%04X:%04X ",
+			       scsi_device_list[i].vendor,
+			       scsi_device_list[i].device);
+		}
+		printf("not found\n");
+		return;
+	}
+#ifdef DEBUG
+	else {
+		printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
+		       scsi_device_list[i].vendor,
+		       scsi_device_list[i].device,
+		       (busdevfunc >> 16) & 0xFF,
+		       (busdevfunc >> 11) & 0x1F,
+		       (busdevfunc >> 8) & 0x7);
+	}
+#endif
+	bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci");
+	scsi_low_level_init(busdevfunc);
+	scsi_scan(1);
+	bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI);
+}
+#endif
+
+/* copy src to dest, skipping leading and trailing blanks
+ * and null terminate the string
+ */
+static void scsi_ident_cpy(unsigned char *dest, unsigned char *src,
+			   unsigned int len)
+{
+	int start, end;
+
+	start = 0;
+	while (start < len) {
+		if (src[start] != ' ')
+			break;
+		start++;
+	}
+	end = len-1;
+	while (end > start) {
+		if (src[end] != ' ')
+			break;
+		end--;
+	}
+	for (; start <= end; start++)
+		*dest ++= src[start];
+	*dest = '\0';
+}
+
+static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity,
+			      unsigned long *blksz)
+{
+	*capacity = 0;
+
+	memset(pccb->cmd, '\0', sizeof(pccb->cmd));
+	pccb->cmd[0] = SCSI_RD_CAPAC10;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmdlen = 10;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+	pccb->datalen = 8;
+	if (scsi_exec(pccb) != true)
+		return 1;
+
+	*capacity = ((lbaint_t)pccb->pdata[0] << 24) |
+		    ((lbaint_t)pccb->pdata[1] << 16) |
+		    ((lbaint_t)pccb->pdata[2] << 8)  |
+		    ((lbaint_t)pccb->pdata[3]);
+
+	if (*capacity != 0xffffffff) {
+		/* Read capacity (10) was sufficient for this drive. */
+		*blksz = ((unsigned long)pccb->pdata[4] << 24) |
+			 ((unsigned long)pccb->pdata[5] << 16) |
+			 ((unsigned long)pccb->pdata[6] << 8)  |
+			 ((unsigned long)pccb->pdata[7]);
+		return 0;
+	}
+
+	/* Read capacity (10) was insufficient. Use read capacity (16). */
+	memset(pccb->cmd, '\0', sizeof(pccb->cmd));
+	pccb->cmd[0] = SCSI_RD_CAPAC16;
+	pccb->cmd[1] = 0x10;
+	pccb->cmdlen = 16;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+	pccb->datalen = 16;
+	if (scsi_exec(pccb) != true)
+		return 1;
+
+	*capacity = ((uint64_t)pccb->pdata[0] << 56) |
+		    ((uint64_t)pccb->pdata[1] << 48) |
+		    ((uint64_t)pccb->pdata[2] << 40) |
+		    ((uint64_t)pccb->pdata[3] << 32) |
+		    ((uint64_t)pccb->pdata[4] << 24) |
+		    ((uint64_t)pccb->pdata[5] << 16) |
+		    ((uint64_t)pccb->pdata[6] << 8)  |
+		    ((uint64_t)pccb->pdata[7]);
+
+	*blksz = ((uint64_t)pccb->pdata[8]  << 56) |
+		 ((uint64_t)pccb->pdata[9]  << 48) |
+		 ((uint64_t)pccb->pdata[10] << 40) |
+		 ((uint64_t)pccb->pdata[11] << 32) |
+		 ((uint64_t)pccb->pdata[12] << 24) |
+		 ((uint64_t)pccb->pdata[13] << 16) |
+		 ((uint64_t)pccb->pdata[14] << 8)  |
+		 ((uint64_t)pccb->pdata[15]);
+
+	return 0;
+}
+
+
+/*
+ * Some setup (fill-in) routines
+ */
+static void scsi_setup_test_unit_ready(ccb *pccb)
+{
+	pccb->cmd[0] = SCSI_TST_U_RDY;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmd[2] = 0;
+	pccb->cmd[3] = 0;
+	pccb->cmd[4] = 0;
+	pccb->cmd[5] = 0;
+	pccb->cmdlen = 6;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+}
+
+/**
+ * scsi_init_dev_desc_priv - initialize only SCSI specific blk_desc properties
+ *
+ * @dev_desc: Block device description pointer
+ */
+static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc)
+{
+	dev_desc->target = 0xff;
+	dev_desc->lun = 0xff;
+	dev_desc->log2blksz =
+		LOG2_INVALID(typeof(dev_desc->log2blksz));
+	dev_desc->type = DEV_TYPE_UNKNOWN;
+	dev_desc->vendor[0] = 0;
+	dev_desc->product[0] = 0;
+	dev_desc->revision[0] = 0;
+	dev_desc->removable = false;
+#ifndef CONFIG_BLK
+	dev_desc->block_read = scsi_read;
+	dev_desc->block_write = scsi_write;
+#endif
+}
+
+#if !defined(CONFIG_DM_SCSI)
+/**
+ * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties
+ *
+ * @dev_desc: Block device description pointer
+ * @devnum: Device number
+ */
+static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum)
+{
+	dev_desc->lba = 0;
+	dev_desc->blksz = 0;
+	dev_desc->if_type = IF_TYPE_SCSI;
+	dev_desc->devnum = devnum;
+	dev_desc->part_type = PART_TYPE_UNKNOWN;
+
+	scsi_init_dev_desc_priv(dev_desc);
+}
+#endif
+
+/**
+ * scsi_detect_dev - Detect scsi device
+ *
+ * @target: target id
+ * @lun: target lun
+ * @dev_desc: block device description
+ *
+ * The scsi_detect_dev detects and fills a dev_desc structure when the device is
+ * detected.
+ *
+ * Return: 0 on success, error value otherwise
+ */
+static int scsi_detect_dev(int target, int lun, struct blk_desc *dev_desc)
+{
+	unsigned char perq, modi;
+	lbaint_t capacity;
+	unsigned long blksz;
+	ccb *pccb = (ccb *)&tempccb;
+
+	pccb->target = target;
+	pccb->lun = lun;
+	pccb->pdata = (unsigned char *)&tempbuff;
+	pccb->datalen = 512;
+	scsi_setup_inquiry(pccb);
+	if (scsi_exec(pccb) != true) {
+		if (pccb->contr_stat == SCSI_SEL_TIME_OUT) {
+			/*
+			  * selection timeout => assuming no
+			  * device present
+			  */
+			debug("Selection timeout ID %d\n",
+			      pccb->target);
+			return -ETIMEDOUT;
+		}
+		scsi_print_error(pccb);
+		return -ENODEV;
+	}
+	perq = tempbuff[0];
+	modi = tempbuff[1];
+	if ((perq & 0x1f) == 0x1f)
+		return -ENODEV; /* skip unknown devices */
+	if ((modi & 0x80) == 0x80) /* drive is removable */
+		dev_desc->removable = true;
+	/* get info for this device */
+	scsi_ident_cpy((unsigned char *)dev_desc->vendor,
+		       &tempbuff[8], 8);
+	scsi_ident_cpy((unsigned char *)dev_desc->product,
+		       &tempbuff[16], 16);
+	scsi_ident_cpy((unsigned char *)dev_desc->revision,
+		       &tempbuff[32], 4);
+	dev_desc->target = pccb->target;
+	dev_desc->lun = pccb->lun;
+
+	pccb->datalen = 0;
+	scsi_setup_test_unit_ready(pccb);
+	if (scsi_exec(pccb) != true) {
+		if (dev_desc->removable) {
+			dev_desc->type = perq;
+			goto removable;
+		}
+		scsi_print_error(pccb);
+		return -EINVAL;
+	}
+	if (scsi_read_capacity(pccb, &capacity, &blksz)) {
+		scsi_print_error(pccb);
+		return -EINVAL;
+	}
+	dev_desc->lba = capacity;
+	dev_desc->blksz = blksz;
+	dev_desc->log2blksz = LOG2(dev_desc->blksz);
+	dev_desc->type = perq;
+removable:
+	return 0;
+}
+
+/*
+ * (re)-scan the scsi bus and reports scsi device info
+ * to the user if mode = 1
+ */
+#if defined(CONFIG_DM_SCSI)
+static int do_scsi_scan_one(struct udevice *dev, int id, int lun, int mode)
+{
+	int ret;
+	struct udevice *bdev;
+	struct blk_desc bd;
+	struct blk_desc *bdesc;
+	char str[10];
+
+	/*
+	 * detect the scsi driver to get information about its geometry (block
+	 * size, number of blocks) and other parameters (ids, type, ...)
+	 */
+	scsi_init_dev_desc_priv(&bd);
+	if (scsi_detect_dev(id, lun, &bd))
+		return -ENODEV;
+
+	/*
+	* Create only one block device and do detection
+	* to make sure that there won't be a lot of
+	* block devices created
+	*/
+	snprintf(str, sizeof(str), "id%dlun%d", id, lun);
+	ret = blk_create_devicef(dev, "scsi_blk", str, IF_TYPE_SCSI, -1,
+			bd.blksz, bd.blksz * bd.lba, &bdev);
+	if (ret) {
+		debug("Can't create device\n");
+		return ret;
+	}
+
+	bdesc = dev_get_uclass_platdata(bdev);
+	bdesc->target = id;
+	bdesc->lun = lun;
+	bdesc->removable = bd.removable;
+	bdesc->type = bd.type;
+	memcpy(&bdesc->vendor, &bd.vendor, sizeof(bd.vendor));
+	memcpy(&bdesc->product, &bd.product, sizeof(bd.product));
+	memcpy(&bdesc->revision, &bd.revision,	sizeof(bd.revision));
+	part_init(bdesc);
+
+	if (mode == 1) {
+		printf("  Device %d: ", 0);
+		dev_print(bdesc);
+	}
+	return 0;
+}
+
+int scsi_scan(int mode)
+{
+	unsigned char i, lun;
+	struct uclass *uc;
+	struct udevice *dev; /* SCSI controller */
+	int ret;
+
+	if (mode == 1)
+		printf("scanning bus for devices...\n");
+
+	blk_unbind_all(IF_TYPE_SCSI);
+
+	ret = uclass_get(UCLASS_SCSI, &uc);
+	if (ret)
+		return ret;
+
+	uclass_foreach_dev(dev, uc) {
+		struct scsi_platdata *plat; /* scsi controller platdata */
+
+		/* probe SCSI controller driver */
+		ret = device_probe(dev);
+		if (ret)
+			return ret;
+
+		/* Get controller platdata */
+		plat = dev_get_platdata(dev);
+
+		for (i = 0; i < plat->max_id; i++)
+			for (lun = 0; lun < plat->max_lun; lun++)
+				do_scsi_scan_one(dev, i, lun, mode);
+	}
+
+	return 0;
+}
+#else
+int scsi_scan(int mode)
+{
+	unsigned char i, lun;
+	int ret;
+
+	if (mode == 1)
+		printf("scanning bus for devices...\n");
+	for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++)
+		scsi_init_dev_desc(&scsi_dev_desc[i], i);
+
+	scsi_max_devs = 0;
+	for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+		for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) {
+			ret = scsi_detect_dev(i, lun,
+					      &scsi_dev_desc[scsi_max_devs]);
+			if (ret)
+				continue;
+			part_init(&scsi_dev_desc[scsi_max_devs]);
+
+			if (mode == 1) {
+				printf("  Device %d: ", 0);
+				dev_print(&scsi_dev_desc[scsi_max_devs]);
+			} /* if mode */
+			scsi_max_devs++;
+		} /* next LUN */
+	}
+	if (scsi_max_devs > 0)
+		scsi_curr_dev = 0;
+	else
+		scsi_curr_dev = -1;
+
+	printf("Found %d device(s).\n", scsi_max_devs);
+#ifndef CONFIG_SPL_BUILD
+	setenv_ulong("scsidevs", scsi_max_devs);
+#endif
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_BLK
+static const struct blk_ops scsi_blk_ops = {
+	.read	= scsi_read,
+	.write	= scsi_write,
+};
+
+U_BOOT_DRIVER(scsi_blk) = {
+	.name		= "scsi_blk",
+	.id		= UCLASS_BLK,
+	.ops		= &scsi_blk_ops,
+};
+#else
+U_BOOT_LEGACY_BLK(scsi) = {
+	.if_typename	= "scsi",
+	.if_type	= IF_TYPE_SCSI,
+	.max_devs	= CONFIG_SYS_SCSI_MAX_DEVICE,
+	.desc		= scsi_dev_desc,
+};
+#endif